Super C stering update

Posted by mel on June 07, 2002 at 04:57:58 from (198.26.123.37):

I used a hydraulic press to take the bearings and worm wheel gear off. Made it an easier job than driving them off using a block of wood and a hammer. Cleaned all parts up and painted the appropriate areas on some. The new seals and gaskets should be here today from my IH dealer so I should have the steering all together tomorrow morning. Bearings were in good shape and so was the worm gear. The sector gear has one broken tooth, but I am going to rotate the gear and it will be on the back side 180 degrees away from the worm gear. I appreciate all the help from you guys. Your confidence building really makes a difference.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Super C stering update Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]