|
Farmall & IHC Tractors Discussion Board |
Re: Can anyone explain what this handle does?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Nils on June 11, 2002 at 17:27:57 from (66.31.47.147):
In Reply to: Can anyone explain what this handle does? posted by Mike on June 11, 2002 at 15:12:36:
That handle is for draft control when plowing. All the way up is most sensitive and all the way down is less sensitive. There are many ways to use a fast hitch. IH has a manual just for the fast hitch w/a chart detailing all the changes to be made for the different types of implements and chores. There is a place below the hyd cyl for a pin or bolt that will allow for down pressure. If there hasn't been anything in that hole for a while, it's probably jammed up with dirt. You'll have to get down there with a flashlight and a pick to loosen it up enough to blow it out w/compressed air. You can email me direct w/ any other questions about 460U's. Happy to help. Nils
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
