Farmall & IHC Tractors Discussion Board |
Solid core spark plug wires?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Grampsold544 on June 21, 2002 at 05:10:48 from (64.105.216.218):
The mechanic I had working on my I-544 said that I presently have some sorta resistance wire for the spark plugs (12 V system). He said that most new spark plug wires are like this (mostly for automoblie) and have some sorta silicon core instead of a solid piece of copper going thru the middle. I would like to know what is the name of spark plug wire he recommended with the copper core and where they are avalable? One more thing, my tractor was missing really bad and the mechanic would pull the sparkplug wire out slightly and the missing would go away. He said this was due to making an air gap that increased the resistance of the circuit (air hard to conduct electicity thru).
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|