Re: How big of blade should I by

Posted by Dan on June 21, 2002 at 06:32:42 from (12.18.160.159):

In Reply to: How big of blade should I by posted by Grampsold544 on June 20, 2002 at 10:06:02:

There is a lot of difference in back blades depending upon what you want to do with them. The simple type with manual angle etc work fine for plowing snow. Some are heavier than others though which makes a difference in how well they stay down and how long they stay together. Here again depends upon how and how much you use it. I have an old no name that is ok for plowing snow but I also have a JD #80 also old but is a lot heavier and cuts a lot better. Have used the ones that angle hydraulically and even tilt hydraulically. they are nice if you use it to ditch with and if you have the hydraulics but also expensive.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How big of blade should I by Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]