Re: 300int utility

Posted by Red Rider on June 28, 2002 at 20:55:03 from (65.239.44.75):

In Reply to: 300int utility posted by Joe C. Al. on June 28, 2002 at 17:04:58:

Does your 300 U have 3 hydratouch valves? If you don't have 3 valves then you could get hydraulic pressure by removing the block off plate. The pressure port is threaded. If you have three valves then the hydraulic supply should be coming from the regulator valve behind the rear valve. If they don't then they have most likely been added and not plumbed like it would have been from the factory. I really don't think you will be very happy using the tractor pump as it only puts out 10 gpm 12 to 1500 psi when new. A PTO pump or a front mounted pump would give you a lot better results.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 300int utility Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]