Re: What is the correct operating position for the

Posted by Dick Davis on July 16, 2002 at 08:36:16 from (152.163.189.203):

In Reply to: What is the correct operating position for the posted by Scott (TN) on July 16, 2002 at 08:10:25:

The T/A is disengaged (normal operation) when the operating lever is forward.
Some points to remember:Always engage/disengage the TA smartly (do not ease the lever forward or back as this causes excess wear). Never engage the TA going downhill or let the tractor free wheel with TA engaged as this is very stressful to the gearing. Most believe the tractor should be operated in the correct gear for the prevailing conditions and the TA used only to boost for temporary changes like a hard spot plowing or large bunch in a windrow when baling. As an example plowing all day in 2nd gear is smarter than plowing in 3rd with TA.
FARMALL/400 emblems: check classifieds.
Buy an operators manual - available from Case-IH. Good luck and welcome to the wonderful world of Red Power.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: What is the correct operating position for the Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]