Re: need help removing stuck bolt

Posted by smotch on July 20, 2002 at 11:05:26 from (65.164.229.233):

In Reply to: need help removing stuck bolt posted by Hayne D. Matthews on July 20, 2002 at 10:29:41:

Hayne ; What has worked best for me is to weld a nut that is the next size bigger than the broken bolt. A wire feed welder works best for this. Clean the broken stud with a wire wheel and then use a pliers to hold the nut over the stud and weld the nut to the stud through the threads until the weld is even with the top of the nut. If the plate is not off the engine do so as it will help. Let the nut cool then try to rock the nut back and forth gently . Allowing the nut to soak with penetrating oil also helps.As for easy outs I have had nothing but agravation. I hope this helps.

Follow Ups:

• Re: Re: need help removing stuck bolt bob 15:27:38 07/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: need help removing stuck bolt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]