Super C Fan Hub

Posted by Clyde on July 21, 2002 at 14:01:41 from (63.146.82.143):

My fan keeps throwing oil all over the belts. I have filled the hub the way the operators manual says, so I don't think that is the problem. Today I took the hub all apart. The bearing seems to fit tight, so I don't think a loose bearing is the problem either. My question is about the 3 machined groves in the spindle. Are there supposed to be o-rings on the spindle? I have the parts manual, and it doesn't show any. This would not be the first time this tractor was missing something.

Follow Ups:

• Re: Super C Fan Hub Haas 03:31:10 07/22/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Super C Fan Hub Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]