3 point hydraulic cylinders 3 or 4 inch

Posted by bobbgood2 on July 31, 2002 at 18:46:55 from (65.241.73.166):

after reading the specification section in the IH service manual GSS-5034 for the hydraulic lift-all I need opinions on which to use and why. Two 3 inch diameter cylinders or one 4 inch. The way I figure it two 3 inch cyl. at 800-lb. of hyd. pressure will lift 11,312 lbs. and one 4 inch cyl. will lift 10,000 lbs.. Do I need the extra cyl. for general 3 point work (bush hog, bale spike, box blade, etc.)?
I'd like to hear your opinions.

Follow Ups:

• Re: 3 point hydraulic cylinders 3 or 4 inch Zonie 20:52:28 07/31/02 (0)
• Re: 3 point hydraulic cylinders 3 or 4 inch BIG JOHN 19:20:46 07/31/02 (0)

Post A Followup Name: E-Mail: Subject: Re: 3 point hydraulic cylinders 3 or 4 inch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]