Re: IH 424 GAS

Posted by David on August 13, 2002 at 17:53:30 from (65.25.197.60):

In Reply to: IH 424 GAS posted by DB on August 12, 2002 at 20:06:09:

According to my 424 hydraulic manual, position and draft controls must be in the neutral position for the auxiliary valves to operate. I quote,
"With the position control in the "Neutral" position, fluid flows from the pump to the flow divider. The flow divider routes half of the fluid to the steering which is shown in neutral. THis fluid returns to the suction side of the pump. The other half of the fluid is routed through a filter to the auxiliary valves."

Now the manual does not show what neutral is for the position control. I bet it is half way like you have it. Are you sure you changed the filter for the auxiliary valves? If memory serves, it is in a cylinder under the seat. If you did change it maybe your flow control valve is sending everything to the steering until you close the isolation valve..

Just my $.02

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 424 GAS Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]