Re: Re: Front end rebuild on an H... Help...

Posted by williamf on August 23, 2002 at 15:05:06 from (66.82.9.13):

In Reply to: Re: Front end rebuild on an H... Help... posted by Carey on August 23, 2002 at 11:26:28:

Several places on the H the modern oil seals are half the thickness of the originals. Since there's plenty of room for two of the new ones and they are (relative to most parts)cheap, a lot of times peaple will put two. I know I did on the brake shafts and the bottom of the sector housing. Couldn't hurt, might help make up for the worn places in the shaft.
Modern grease is better,too. If they'd had it back then they wouldn't have used 90wt in the sector housing.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Front end rebuild on an H... Help... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]