Re: Re: Changing the mag condenser on my H

Posted by Diesel Don on September 02, 2002 at 18:19:04 from (206.40.117.234):

In Reply to: Re: Changing the mag condenser on my H posted by Mike Schotte on September 02, 2002 at 15:10:16:

Hey Mike,this is awful familiar ain't it?Ted,if you need to remove the mag to replace the condenser you may want to do the points at the same time.It's easier to do on the bench than the tractor.Then,follow the timing proceedure in your shop manual to time it.Mike can probably help you time your tractor if needed.Have fun!BTW,make sure your impulse coupling is OK.Crank the tractor slowly and you should hear it trip.If not,it is not working and without it,you will not get a spark at cranking speed.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Changing the mag condenser on my H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]