|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: 184 LO-BOY COIL PROBLEM
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BILL R on September 10, 2002 at 06:23:29 from (64.12.97.13):
In Reply to: Re: Re: Re: 184 LO-BOY COIL PROBLEM posted by Bama Binder on September 09, 2002 at 14:03:44:
THANK'S BAMA & SKYPILOT FOR YOUR REPLIES. I AM USING A 12v COIL, FOR USE WITH AN EXTERNAL RESISTOR. I CHANGED THE PLUGS, PLUG WIRES, POINTS, CONDENSER, CAP, ROTOR AND COIL WIRE ABOUT 3 MONTHS AGO. THE PROBLEM EXSISTED PRIOR TO THIS AND STILL DOES. I HAVE TESTED THE ALTERNATOR OUTPUT AND IT IS WITHIN 10% OF RATED OUTPUT. THE ONLY THING I HAVE NOT DONE IS REPLACE THE (+) WIRE FROM THE SWITCH TO THE COIL AND THE (-) WIRE FROM COIL TO DISTRIBUTOR. I HAVE TESTED THESE WIRES AND THEY BOTH HAVE GOOD CONTINUITY. CAN YOU GUYS THINK OF ANY THING ELSE? I AM ABOUT TO CONCEDE TO THE FACT THAT MY COILS ARE CONSUMABLES, LIKE GAS AND OIL AND JUST HAVE TO BE REPLENISHED ONCE A MONTH OR SO.
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
