Re: Rebuilding carb

Posted by Allen R on October 02, 2002 at 10:59:57 from (168.9.128.46):

In Reply to: Rebuilding carb posted by Randy on October 02, 2002 at 05:42:37:

Randy, that gasket breaking is a good sign that
you need to rebuild - Bendix name often on a
Zenith carb. You now have top and bottom halves,
keep them seperate and rebuild one section at a
time - this will keep it simple and not any risk
of mixing a part...Purchase a gallon of carb parts
cleaner at local auto store - have some shop
cloths on hand... You will need an identifying
mark on your carb - NAPA, Carquest, Tractor Supply
or similar should be able to get you kit - take
the carb with you or at least the top half for
them to inspect - when you get above - Post and
we will work thru rebuild - Allen R... (I posted
a similar message earlier but I don't think it went thru, so if repeat on this you'll know....

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Rebuilding carb Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]