Re: H-powered wood splitter?

Posted by JWC on October 11, 2002 at 15:44:09 from (130.74.184.124):

In Reply to: H-powered wood splitter? posted by Al Reisman on October 10, 2002 at 18:23:11:

The age of your H may make a difference in the pressure. The earlier Liftalls were setup for 500 psi, the later units were setup for 800 psi and had an 8 painted on the side of the unit. If you have a 500 psi unit you will need a larger cylinder which will operate more slowly and require a larger reservoir. If speed is important an auxiliary pump is one answer. The lower cost of a smaller cylinder will help offset the cost of the pump and help extend the life of your liftall.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H-powered wood splitter? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]