Re: Live Hydraulic Pump for H

Posted by Steven@nd on November 01, 2002 at 10:00:57 from (165.234.130.25):

In Reply to: Live Hydraulic Pump for H posted by Chris on November 01, 2002 at 08:37:20:

This has been discussed several times. The live pump will fit your H, BUT you need the timing cover from SH/300/350 to make it fit right. You should also switch the cam gear to 300/350 because they are built heavier for the increased load.

As for the plumbing, I have a diagram for where to drill a hole in the belly pump reservoir for suction, I can scan it and email it to you if you like - email me if you want it. I think the original drain plug for the reservoir is too small to allow enough oil to get through for the pump.

Then from the pressure side of the pump go to your spool valve for hydralic control, be sure it is open center. Return from the spool valve can go right back into the suction line (at the belly reservoir), I would plumb it in with a T in the line.

Ask more questions if you need clarification, people here are happy to help!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Live Hydraulic Pump for H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]