Re: M jumping time

Posted by Joe on November 12, 2002 at 05:34:52 from (208.34.48.173):

In Reply to: M jumping time posted by ken wade on November 11, 2002 at 15:56:05:

I had a 400 that did this for about six months. Every time I tried to start it needed some TLC. Drove Me crazy. Finally it would not start at all. Checked to make sure it was in time and it was. Replaced plugs, points, condensor, and cap. Still no go. Had blow back through carb when trying to start. Thought it was in need of head rebuild. Gave it one and still no go. Finally found that cam gear nut had backed off cam and gear was breaking teeth off. Could be a possibility. Probably the worse case scenario. But, may save you time knowing this.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M jumping time Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]