Re: IH 350U 2pt lift cylinder

Posted by dick on November 15, 2002 at 08:11:54 from (63.211.243.48):

In Reply to: IH 350U 2pt lift cylinder posted by Mark on November 14, 2002 at 11:33:39:

350U Fast Hitch assemblies came in two flavors, one "simple" and the other the early "traction-control" variety.

The simpler one takes a 3-1/2"x8" cylinder, IH#360997R91. I've seen these displayed at a CaseIH dealer in the recent past, so you can probably find them on the shelf (somewhere). A standard ag cylinder could probably also be used for this service, but you'd want to check carefully for fit.

The traction-control assembly took an unusual cylinder with a single bushing at the end of the pistion, IH#366275R91, also 3-1/2"x8". I've never seen one of these except on an existing tractor. I'd imagine the chances of finding one are slim.

Hope this is useful to you. LOL.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 350U 2pt lift cylinder Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]