Re: Hydraulic oil in base of engine

Posted by Peabody on November 29, 2002 at 20:36:03 from (152.163.189.203):

In Reply to: Hydraulic oil in base of engine posted by Murray on November 29, 2002 at 17:10:02:

Had the same problem recently. Remove the pump and replace the seal on the driven gear. You have to release the retaining washer from the nut on the front of it. Go ahead and replace the O-rings in the pump, only three of them, I think. The seal, O-rings, and a new gasket cost me $17 at the IH dealer, and took about thirty minutes from start to finish (You will also need a new gasket between the manifold and Touch Control Unit, since you have to remove the manifold to remove the pump). They made two variations of the pump, but I think all the C's had the "modern" metal & rubber seal instead of a leather washer. Remove the pump and take it with you to the parts man so he can identify it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Hydraulic oil in base of engine Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]