Posted by Mark from WI on March 28, 2009 at 15:40:20 from (69.179.109.5):
I went out to the farm today to put my axle seals in the 300. Already had it up on blocks last weekend. So I took a buddy with me. Along with him and my dad we took the wheels off and the hubs off. I took the covers off the end of the axle housing. Went to check to see if I had the right seals and low and behold they were wrong. Which didn't surprise me. I bought them from the local auto parts store and they told them I could bring them back if they were wrong. My question is what size are the axles on the 300 row crop? I measured them and they were 2 1/2 inches across and the seals I had purchased was 1 3/4 inches. The old seals and the new seals looked identical except the size. I just want to make sure the tractor has the right axles in it so I don't spend a bunch of time trying to find the right ones.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
