Re: Re: Ramps for the trailer to load and H

Posted by JMS/MN on December 06, 2002 at 16:35:52 from (63.21.83.58):

In Reply to: Re: Ramps for the trailer to load and H posted by Don LC on December 06, 2002 at 16:19:07:

Ramps for the rear wheels should have angled legs under the front of them, which just barely clear the ground when on a level surface. The key to not pushing the trailer ahead is to have the foot of the leg slightly FORWARD of the pivot shaft of the ramp. That way the ramp does not fold up behind the tractor's rear wheels. Found that out the hard way!

Follow Ups:

• Re: Re: Re: Ramps for the trailer to load and H Haas 17:42:25 12/06/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Ramps for the trailer to load and H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]