Farmall & IHC Tractors Discussion Board |
Re: SMTA has Char-lynn power steering problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Les Repair on December 13, 2002 at 16:38:07 from (67.0.87.7):
In Reply to: SMTA has Char-lynn power steering problem posted by RB on December 12, 2002 at 19:43:21:
I've fought this problem too. The return oil rushes from the bottom and hits the lid, causing oil to spray against the vent in the lid. If you have the original flat washer which came with the lid, you will see a slot machined in the washer. That is supposed to be a vent, so air can go in and out as it heats and cools. You don't want any gaskets or seals in this area. Cut a piece of tin the size of the resavoir and slide it down the hold down stud right on top of the filter. This will act as a baffle and keep the oil from rushing against the lid. It has workrd several times for me.
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|