Farmall & IHC Tractors Discussion Board |
Re: Knock in Super A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dennis Benson on January 18, 2003 at 09:58:45 from (205.188.209.78):
In Reply to: Knock in Super A posted by Wayne in VA on January 17, 2003 at 18:45:48:
If you get to this point, you can remove the valve cover and check the pushrods by spinning them in place and see if any wobble, you'll have to turn the engine over by hand to relieve the pressure on the valves. You can remove the oil pan quite easy, if I remember right, and reach up into the underside of the piston and see if the wrist pin feels loose, you might see if the piston rocks too much which could be a piston slap from a worn or broken skirt. While you're there you can see if the rod feels loose on the crankshaft. You would probably want new gaskets to put the pan and rocker arm cover back on.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|