Re: m farmall hydraulics

Posted by Michigan Dave on January 22, 2003 at 09:37:17 from (207.148.202.174):

In Reply to: m farmall hydraulics posted by randy grider on January 21, 2003 at 13:11:05:

Randy you say u put couplers on 2 of the 3 ports
on your H. I believe you are putting pressure on
both sides of the cylinder. You need to take
pressure from one of the A ports and plumb a
return from the cylinder back to the filler neck
This will let your double acting cylinder act as
a single acting. When you hook up to a tractor
with double acting hyd. you will have to cycle the
cylinder several times to work the air out.

hope this helps
Michigan Dave

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: m farmall hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]