Re: Farmall 560 Hydraulic ?

Posted by Alton on January 22, 2003 at 15:57:44 from (64.4.103.72):

In Reply to: Farmall 560 Hydraulic ? posted by E MARIER on January 22, 2003 at 10:39:53:

It is hard to say what is the matter with your loader valves without looking at them. If you keep having the same troulble then you haven't found the cause or they are worn. Check with a pressure gauge connected into the line that controld the loader and see if you are getting the correct pressure. You may have to read the gauge at the end of the cylinder stroke as this gives you the reliel pressure reading. If you don't have any pressure check for fluid flow. As for the amount of lift it depends on pressure and the size of your cylinders.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 560 Hydraulic ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]