Re: 3 point hitch on 100 farmal

Posted by Hugh MacKay on February 04, 2003 at 20:15:14 from (64.228.12.170):

In Reply to: 3 point hitch on 100 farmal posted by Ray on February 04, 2003 at 18:42:47:

Ray: I have a set of lower links for a 3 point I bought at a scrapyard. I made up a set of large pins that go through that large hole on hitch at bottom of final drive. I have cat 1 pins welded to the head of each. I just have to pull 3 pins and the fast hitch pull bar is off. I lift the 3 point links with same lift links as the 1 point. I use a fabricated pivot to allow free movment both ways. Top link hooks to cross shaft at top.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 3 point hitch on 100 farmal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]