Re: lift all on farmall H

Posted by Bob in SE Nebraska on February 07, 2003 at 17:30:36 from (162.40.71.112):

In Reply to: lift all on farmall H posted by josh on February 07, 2003 at 16:28:59:

Josh, If you have two levers on the hydraulic it sounds like you have a two way setup installed on the H. To make it work pull both the levers at one time and it should work. To make a cylinder retract or go the other way pull the lever that attaches directly to the lift all and push the other lever that attaches higher on the tractor. When you start out in 5th gear you will need to let the clutch out slow and it sounds like it is acting normally. Hope this helps, Bob

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: lift all on farmall H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]