Re: Farmall B Air Cleaner

Posted by Roger on February 10, 2003 at 19:00:28 from (209.100.170.81):

In Reply to: Farmall B Air Cleaner posted by ODY inWA on February 10, 2003 at 13:37:30:

I just rebuilt the one on my Farmall B. I think someone had tipped over the tractor as all things sticking upward were damaged. The lower part of the filter is soldered on. I heated it up and tapped it off with a hammer as I kept it hot. What I did was made a good one out of two. The good one I bought at the salvage yard had a couple of dents in the side. So I took all the screens out of the inside. That is the hard part as they are tightly pushed into the can. The screens also change size as you move up the filter. I ended up damaging some of the upper ones getting them out, but was able to straighten out and put back. After getting them all out I could get all the dents out and then reassemble. Then I soldered the bottom back on. It really turned out looking nice. I am not sure how you would convert to a cartridge filter. The thing is the air comes in the center and goes out the side so it may be able to adapt some kind of air filter if you could get some kind of a seal at the top. Trouble is that is the reverse of how filters are usually installed. Good luck. Roger

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall B Air Cleaner Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]