Re: H hydraulic pump - run continuously?

Posted by Bob M on March 03, 2003 at 18:26:34 from (66.66.123.133):

In Reply to: H hydraulic pump - run continuously? posted by Brent on March 03, 2003 at 17:53:13:

Brent - As long as you feed an open center, 4-way remote valve from the belly pump outlet, you won't a thing to tie the liftall lever back so the pump runs continuously in the "raise" position. In fact some liftalls have a latch on the control rod to accomplish exactly that without resorting to wires, etc to tie the lever back. My stage I (non-live hydraulic equipped) Super H came from the factory equipped with the liftall lever latch and an aux 4-way remote valve.

Keep in mind however this set-up will not be "live"! Soon as you hit the clutch the belly pump will stop and so will the hydraulics.

Follow Ups:

• Re: Re: H hydraulic pump - run continuously? Brent 04:00:32 03/04/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H hydraulic pump - run continuously? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]