Re: Clutch Friction Disk

Posted by Haas on March 14, 2003 at 06:32:52 from (166.72.245.15):

In Reply to: Clutch Friction Disk posted by Jeff_MI on March 13, 2003 at 17:41:38:

There should be a Clutch/brake shop some place not too far from you. If you take the clutch parts there, they will reline the disk, resurface the flywheel and check and rebuild and/or adjust the pressure plate for you. That's what I have done in the past with good results. You will find this is cheaper than the IH dealer and most other aftermarket sources for clutch parts. The shop I use almost always has the clutch release bearings in stock. They even had a rebuilt clutch disk for a Farmall A in stock the last time I was there, but they relined mine.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Clutch Friction Disk Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]