Farmall & IHC Tractors Discussion Board |
IH, 1965+/-, 3514 Loader Backhoe; won't go in reverse
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John Smysrski on March 19, 2003 at 03:02:37 from (198.115.163.86):
I bought a IH loader/backhoe at an auction years ago and I haven't been able to use it as it won't go in reverse. The transmission shifts and the wheels turn in reverse (I lift the rear end up on the backhoe stabilizer bars) but it has no "courage" to move the tractor. I rebuild the engine (4 cyl C-153 gasoline) and found that the fuel tank and the cooling system had dirt and sand in them. I 've drained all the fluids and replaced. Replaced both hydro filters. New seals on the hydro pump in the front of the tractor. I bought manuals, but they don't seem to match my tractor. I cannot find how to get to the shuttle pin in the transmission. Has anyone had this problem? Do you have any advice? My wife is going to start pushing hard this spring for me to get it out of here.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|