|
Farmall & IHC Tractors Discussion Board |
Hey T.P.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by steve450 on March 24, 2003 at 15:33:41 from (64.78.90.155):
I read your reply a few pages back but decided to start on the front page. How's the 706 working so far? We got the nice Oliver 12' disc (the one with the new paint job) that was in the second field, and the New Idea 402 rake also in the second field at the corner by the road. Both in good shape as far as we can tell. We pulled the rake around the yard a little when we got home and it seems to work fine. We left about half way through the second field so I can't tell you what the 450 went for, but it seems that the bigger, newer tractors were going cheap and the old ones were a little high. We saw a 3010 JD gas go for $2100 and a cyclone A brought $1800. Go figure. The Oliver 1855 only got $4000 and the big Ford next to it got $3800. What did you give for the 706, If I may ask? We spent just over $1000 for the disc and the rake total. We were looking to get a new holland rake, but after watching them sell 4 of them for about $1200 each, we lowered our standards just a bit. The NI is a decent rake from what I've heard.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
