banjo fittings

Posted by Foz on March 27, 2003 at 13:14:10 from (152.163.189.203):

I posted a day or so ago bout banjo fittings and a source of them. thanks to all that offered help.I did manage to get a few good leads.....Then while looking at the fitting sitting on the bench last night I thought "all that is ,is a pile of differant sized washers with a tube out the side!" So...after digging through my washer bucket for the correct size washers, I put them in the order I thought would work and welded them together. tapped a hole in the side for a tube. cut a groove on each face with a hole saw to accept an O ring , and wallah! After some cleaning up and installation the dang thing actually holds pressure! At least for the 15 minutes I ran it. I geuss time will tell! But at least I didn't have to wait for one to come in the mail!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: banjo fittings Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]