Re: SH cold blooded

Posted by Tim K. on March 29, 2003 at 12:19:53 from (12.217.168.45):

In Reply to: SH cold blooded posted by Old Iron on March 29, 2003 at 09:56:57:

Your settings for the carb are : load screw {bottom of carb} 3 turns off its seat . air mixture screw {angled screw on side of throttle body} 1.5 turns off seat to start. Idle screw, one turn in after it contacts the the throttle shaft.. And as the other guys have said check the condition of the whole electrical system and also check your air cleaner. They are cold blooded though don't make any final adjustments until it is good and warm. Sometimes frost will form on the manifold just above the carb in certain weather conditions. See Ya Tim K.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: SH cold blooded Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]