Re: Chisel plows - problems with recent debates...

Posted by Brian in MO on March 31, 2003 at 18:32:13 from (216.73.199.160):

In Reply to: Chisel plows - problems with recent debates... posted by Steven@nd on March 31, 2003 at 13:56:19:

What we call a chiesel plow around here will typically have about 1 shank per foot of total width and the shanks are straight (no sweeps) and we normally pull them as deep as we can usaully in the fall. A field cultivator on the other hand has a shank about every 7-8 inches and are made a lot lighter with sweeps and don't run very deep 6-8" just before planting . As for a baler we use a 850 NH with a 65 hp David Brown tractor and have never had any problems (it does pull some hills really hard when your about to make a bale but always makes it) and it would be possible to clog the baler by going to fast or you just make a sloppy bale. That's how we do it. Brian

Follow Ups:

• Re: Re: Chisel plows - problems with recent debates... Steven@nd 19:59:28 03/31/03 (0)
• Re: Re: Chisel plows - problems with recent debates... Brian in MO 18:54:11 03/31/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Chisel plows - problems with recent debates... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]