Re: dumb as a sack of hammers super A

Posted by Hugh MacKay on April 14, 2003 at 08:41:07 from (209.226.247.169):

In Reply to: dumb as a sack of hammers super A posted by gregPA on April 14, 2003 at 05:45:44:

Greg: That No. 60 blade is designed to go between wheels as a center moumt or out front. some were ordered with mounting hardware for both and some for either center or front. The center mount just has a cross member going between final drives that blade push beams pin up to. The front mount attaches at 3 points on tractor, that being the 1.5" square hole on back of steering gear box, at the clutch housing and a brace going to a threaded hole in the side of torque tube just ahead of clutch pedal. I don't have pictures so can't help much that way. Start with that someone may post a picture. Some people have run into as much trouble having both kits and trying to use all not realizing the two possible mounts.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: dumb as a sack of hammers super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]