656 tappet setting

Posted by karl f on April 15, 2003 at 17:21:35 from (65.237.15.45):

after getting a valve job a few years ago, and getting the tappets "close" they need some adjustment now after being worn in. it's gotten pretty noisy. when i did them before i couldn't find a tool with the right size gauge. so where do you find a .027 feeler gauge? mine has a stack of blades, from about 1 to 35, skipping a few along the way. it has a 25, then nothing else close to 27 as it skips up to 30 i think. i was told a round one is a better way to go on worn tappets, but the round ones i see in the store also do not include a 27.
thanks
karl
thanks
-karl

Follow Ups:

• Re: 656 tappet setting bob 19:00:08 04/16/03 (1)
  • Re: Re: 656 tappet setting karl f 23:30:09 04/16/03 (0)
• Re: 656 tappet setting RO 19:44:09 04/15/03 (1)
  • Re: Re: 656 tappet setting karl f 23:27:14 04/15/03 (0)

Post A Followup Name: E-Mail: Subject: Re: 656 tappet setting Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]