Farmall & IHC Tractors Discussion Board |
Re: Need more help
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay again on May 08, 2003 at 18:46:31 from (64.228.12.28):
In Reply to: Need more help posted by Gwen, KY on May 08, 2003 at 17:09:41:
Gwen: That serial tag should be about 2" high and 3.5" long. It will be a metal tag riveted to the cast clutch housing. The serial numbers are not cast into the casting. My reasoning calling this a 100 or 130 are; The breather tube is same size as exhaust pipe, the A and SA had a much smaller breather tube. The fuel tank is positioned so it is about 2.5 " above hydraulic unit. Hydraulic unit is that casting under fuel tank. The SA fuel tank is only about 3/4 " above fuel tank. The top hose from engine to radiator is different on the number series tractors from letter series. I have both Super A and a 130 tractor. The manifold to me looks like number series tractor. Don't let anyone try to tell you this tractor is an A or SA. To me it sounds like advice you were getting was for serial number on A and SA. Those serial numbers are on the bracket that seat mounts on, left side under seat. That is precicely why you weren't finding, it's not an A or SA.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|