|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: problems with clutch adjustment on
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by J MIRGON on May 24, 2003 at 16:53:08 from (66.119.33.135):
In Reply to: Re: Re: Re: problems with clutch adjustment on Far posted by Hugh MacKay on May 24, 2003 at 05:31:37:
It sounds like your clutch disc is not disengaging all the way from the pressure plate, when you adjusted the clutch, adding more free play to the pedal will reduce the amount of space that the disc seperates from the pressure plate. You may try adjusting your pedal so that there is less free play in the pedal, this should increase the seperation between the pressure plate and the disc. allowing for full disengagement of the clutch. However if you have stuck parts this will probably not resolve your problem, but it is easier than splitting it !
GOOD LUCK
Jonathan Mirgon
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
