Re: SMTA Fast Hitch, Does one from a 300 or 400 fi

Posted by Hugh MacKay on June 09, 2003 at 15:17:37 from (64.228.11.159):

In Reply to: SMTA Fast Hitch, Does one from a 300 or 400 fit? posted by Terry on June 09, 2003 at 09:58:38:

Terry: The only fast hitches that will fit an MTA are the sraft controled hitches from either a 450 or 560. The 400 hitch was a depth control hitch only and MTA was not drilled for it. If you happen to find a 400 that someone has added a draft controled hitch to that will work. There is probably a few of those around by now. The quickest way to pick these out is the non draft controled hitch used on 400 had the lift cylinder behind and the depth controll cylinder on right just below the brake pedals.

300,350, 340 and 460 are out as the rear chassis is smaller than the MTA, 400, 450 and 560.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: SMTA Fast Hitch, Does one from a 300 or 400 fi Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]