Re: oil change

Posted by Vern on June 09, 2003 at 21:45:48 from (67.75.238.16):

In Reply to: oil change posted by brent on June 09, 2003 at 20:12:19:

Brent;
Engine - Start by putting in 4 qts 30W oil, run engine for a few minutes and check by opening the lower of the two petcocks on the left side of the oil pan. If oil drips out open the top one. Filters are available from dealer or NAPA. You will probably need to add oil to fill until oil comes out of the top one.

Gear boxes - 90W gear lube. The final drives are drained by removing the two pans. New gaskets are available from dealer. Fill until oil runs out of plugs just above pan line.
Transmission - 90W gear lube. Fill plug is in top cover and full level plug is in outboard side at foward end behind brake rod.

Later on you might change to Hi-Tran available from Case/IH dealer in the gear boxes but for starters 90W will do fine.

Vern

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: oil change Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]