Re: Adding dual remotes to H hydralics

Posted by jeff in pa on June 10, 2003 at 09:48:49 from (63.174.30.178):

In Reply to: Adding dual remotes to H hydralics posted by Kelly C --- the hydralics idot. on May 17, 2003 at 19:29:39:

Kelly,
My H has a front loader that is pressurized from one of the left hand hydraulic outputs into a two lever control that gives me power up and down and power dump up and down.
The pressurized line is T'd before the loader control and goes to the back where i have a single action control under the seat for the 3 point.
There is another single action control under the right hand rear that could be used for whatever... this is pressurized from the right hand hydraulic output.
all returns are tied together and go back into the filler tube. It is quite a sight but works well with the standard 450 psi output.
i leave the loader on all the time and plow snow with a front snow blade in the winter.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Adding dual remotes to H hydralics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]