Re: Farmall C timing adjustment

Posted by Randy in NE on June 12, 2003 at 09:53:44 from (216.58.237.20):

In Reply to: Farmall C timing adjustment posted by Steve Kuehster on June 12, 2003 at 09:22:43:

I have not looked for the timing mark on mine. It is supposed to be on the front pulley. From what I remember reading in previous posts it is pretty hard to see. Growing up we always just timed them by ear. Loosen the locking bolt and slowly rotate the distributor one or the other until it runs the smoothest. It would be a good idea to do this again at fast idle. Also verify that it revs up approriately. P.S. If the plug wires are dried and cracked it is not unusual to get bit pretty good if you try grabbing the distributor cap. Been there and done that.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall C timing adjustment Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]