Re: Installation of External Hydralics on Int. 444

Posted by Jim on June 12, 2003 at 20:18:28 from (24.157.110.221):

In Reply to: Installation of External Hydralics on Int. 444 Die posted by Dave on June 12, 2003 at 12:27:30:

We had a B434D with loader witch is basically the same tractor. If I remenber correctly if you tapped into the aux port in front of the seat there was a value beside the port that had to be opened or closed I can't remember which to activate the aux port but would deactivate the 3 point hitch. The correct way was to cut the feed line from the hydraulic pump to the reservior under the seat. Connect in the remote valves, then the out of the valves to the reservior. A dump line was connected from the valves to the filler plug a the back of the seat.

Hy Pump --Pressure line--- in Valve out --- resevior !
!
Dump to T in filler plug.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Installation of External Hydralics on Int. 444 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]