Re: 560 Brakes grabbing and locking up

Posted by JB on June 19, 2003 at 20:47:49 from (24.157.110.221):

In Reply to: 560 Brakes grabbing and locking up posted by hal on June 19, 2003 at 20:02:22:

Hi, not totally fimiliar with 560 brakes but 300 brakes had two metal disks with three roller balls with tapered tracks in the metal disks. As the brakes we applied the roller balls would roll up the tapered tracks and push the metal disks into the friction disks.

Causes for grabbing and locking were:
1) grease on the friction disks
2) dirt on the roller balls or in the tapered tracks.
3) worn balls or tracks.

Good luck
JB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 560 Brakes grabbing and locking up Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]