Delco DN alternator/regulator question

Posted by K.B. on June 23, 2003 at 17:28:30 from (209.163.43.41):

I'm finishing rewiring an 826 with a Delco DN alternator with external regulator. With the engine shut off, I have 12.6 volts at the batteries. With the engine running, I still have 12.6 and the AMP light is lit up. Everything was fine before I rewired it, but the reason I rewired is the wires to and from the key switch shorted and burned up. There were no sings of burned wiring near the regulator. I've checked for bad connections and can't find any, checked the fan belt tension, and these are brand-new Case-IH wiring harnesses, so is there any way of testing the regulator before I buy a new one?

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Delco DN alternator/regulator question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]