Re: H Governor Rebuild ?

Posted by Bob M on July 07, 2003 at 10:14:31 from (165.170.128.66):

In Reply to: H Governor Rebuild ? posted by Matt K. on July 07, 2003 at 09:58:02:

Matt - First make sure it's not a carb mixture adjustment problem - an excessively lean or plugged idle jet can cause the symptom you describe. Test by very slowly pulling the choke closed while the engine is surging. If you find a choke setting that stops the surging suspect a mixture adjustment problem.

If that doesn't do it next try loosening both ends of the horizontal tube connecting the governor riser and the carburetor. Loosen the pair of screws at both ends of the tube, wiggle it a bit to make sure it's free, then retighten the screws.

If that doesn't help, then either something is binding in the linkage between the governor and the throttle shaft, or the governor mechanism itself is sticking. You'll need to peek inside the governor to find the problem...

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H Governor Rebuild ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]