Re: loader oil

Posted by Hugh MacKay on July 09, 2003 at 04:01:56 from (216.208.58.158):

In Reply to: loader oil posted by chuck on July 08, 2003 at 19:06:38:

Chuck: If the loader is single action and single hose to each cylinder and cylinders are fully retracted, the only place you will even have oil is in hose. If loader is two hose to each cylinder set up, and some of those were even though they were not dual action. Put loader on tractor and raise to full height with those return hoses in a pail to catch the oil. You could take cylinders off loader pull the ram from one end to other a few times, you will get exactly a 1/4 cup more oil out than other way.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: loader oil Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]