Re: IHC 460 shifter problem

Posted by Doug Stockman on July 16, 2003 at 02:57:06 from (65.229.131.34):

In Reply to: IHC 460 shifter problem posted by mark on July 15, 2003 at 12:32:53:

I have the same problem with my 460U. I adjusted all the linkages as outlined in the IT manual. That made problems worse. Did it twice and still worse. I then lengthened the linkage that attaches to the TA lever. This has fixed the problem. I can shift in high or low now. I have found that with really worn tractors, you sometimes have to ignore the directions and adjust until the thing works.

I did a similar thing with my 1940 Farmall A and the governor linkage. Adjusted it to factory settings and made things worse. Took up all the slack and it worked fine.

Best of luck.

Doug Stockman
Penfield, NY

Follow Ups:

• Re: Re: IHC 460 shifter problem Terry 05:35:50 07/16/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: IHC 460 shifter problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]