Re: Bad ring and pinion gears 340 row crop.

Posted by Andy Martin on August 13, 2003 at 14:00:30 from (12.86.250.127):

In Reply to: Bad ring and pinion gears 340 row crop. posted by Russ on August 13, 2003 at 07:59:31:

Did you find the bad bearing?

Or was it sold to you after someone "fixed" it?

If it were mine, I would assemble it and run it without regard to the gears. Make sure the back lash is right.

The gears will probably smooth out and run fine but with noise. The worst you'll do is have to look for gears in a few years.

I wouldn't try to jerk big stumps out with a large chain though. Of course, I don't like to jerk any tractor against any load.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Bad ring and pinion gears 340 row crop. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]